Allowing access through ISR-C1111 to FPR1010

[TheGoob]

Hello

So I configured my RA configuration on my FPR1010 for access to my LAN 192.168.5.0/24 but was curious how exactly would I allow this on my ISR to let me connect to it? Not exactly sure which Ports would be needed opened

[Rob Ingram]

@TheGoob you would need to setup port address translation (port forwarding) on the ISR router to the FPR1010 for the following RAVPN ports:

- SSL-VPN (tcp/443 and udp/443)
- IPSec VPN (udp/500 and udp/4500

[TheGoob]

Ahh alright cool I thank you! Let me give that a try.