AnyConnect DAP Policy not matching Multiple Cert authentication attributes
Could someone please help me to understand do we need any additional setup for DAP to match the Endpoint Attribute Type : Multiple Certificate Authentication. I am planning to test this solution for additional check in all endpoint before approving the access. For VPN we are using AAA as authentication and planning to use DAP certificate check as additional security feature.
I had tested this feature in testing scenario for both Machine and user based certificate but it is not working any help would be much appreciate.
Segmentation Strategy - An ISE Prescriptive Guide
For an offline or printed copy of this document, simply choose ⋮ Options > Printer Friendly Page. You may then Print, Print to PDF or copy and paste to any other document ...
We have the Endpoint purge to delete any thing over 365 days, but this wasn't working as standard since in was installedSo disabled and enabled again and this seem to fix it, as had just under 200k endpoints captured. But it removed all clients that ...
When we unregister FTD from FMC and re-register, all the static routes are lost on it. Sometimes device has database corruption, if re-image is the only solution then upon re-image, FTD comes up fresh and we need to configure everything from scra...
Hi,I have a very simple question; we have two ASA 5585-X working in Active/Standby Mode with multiuser Contexts.Normally Primary Unit is active for failover group 1 and 2; Secondary Unit is standby !At the moment our Secondary Unit is completely disconnec...
Meet the Authors Event - CCIE Security and Practical Applications in Today’s Network: Zero Trust
(Live event – Thursday, 29th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 6:00 p.m. Paris)
This event will have place on Thursday 29th, October 2020 at 1...