Anyconnect IkeV2 With backup server Testing

[mahesh18]

Hi Everyone,

I have configured anyconnect with ikev2 at our two different sites.

Client PC have anyconnect pre configured on their PCs.

Under anyconnect profile at each site  i also put the IP of other site ASA VPN in case if users at site 1 connects to ASA at site 1 then if that ASA is down they should automatically connect to Site 2 ASA.

Need to know how can i test if the users are able to connect to back ASA.

Will this test be  ok

Turn off ASA at site 1 then test from the PC using Site 1 connection name as Site 1 ASA is down or powered off should it automatically connect to

back up server which is ASA at site 2?

Regards

MAhesh

[Marius Gunnerud · Accepted solution]

Yes that test should do the trick and give you an indication if the anyconnect client will failover to the secondary ASA if the primary is unreachable.

--

Please remember to select a correct answer and rate helpful posts