03-02-2020 07:05 AM
Hi, I'm trying to build a DR setup so if the main VPN ASA-5525 (Cluster) fail I have a physical spare to install. I have done this several times and when I do a restore to a like for like platform running the same O/S and f/w etc the licencing info is also applied, however this time after I have done the restore and check the licence output of the show version command it does not match the live system in that the the line for Anyconnect premium Peers shows 750 on the live system and only 2 on the DR unit even though it states at the bottom "This platform has an ASA5525 Premium licence" any ideas please?.
Do I need to purchase another licence but that would defeat the whole DR replacement unit if one failed?
Both run 9.12(3) and ASDM 7.13.(1)
Solved! Go to Solution.
03-02-2020 01:59 PM
The important question is if you have AnyConnect 4 Licenses. If yes, then you can activate the license on all your ASAs as the license is not per device or per connection. Instead the license is per User.
If you are still running AC 3, this license was per device and you needed one license per ASA and the license was bound to the ASA serial number.
The output that the ASA is "5525 Premium" is completely unrelated to the VPN licensing.
03-02-2020 01:59 PM
The important question is if you have AnyConnect 4 Licenses. If yes, then you can activate the license on all your ASAs as the license is not per device or per connection. Instead the license is per User.
If you are still running AC 3, this license was per device and you needed one license per ASA and the license was bound to the ASA serial number.
The output that the ASA is "5525 Premium" is completely unrelated to the VPN licensing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide