AnyConnect RADIUS authentication issues

[philipvoceehs]

Hi Guys,

We're having issues with our RADIUS authentication. We just keep getting login failed when trying to connect to our VPN. We've run an authentication test in ASDM and that works fine so not sure where our issue lies. I've pulled out our config the relevant sections:

aaa-server EHS protocol radius
aaa-server EHS (inside) host 10.0.100.80
timeout 5
key *****
user-identity default-domain LOCAL
aaa authentication login-history

ssl trust-point ASDM_Launcher_Access_TrustPoint_0 inside
ssl trust-point ASDM_Launcher_Access_TrustPoint_0 outside
ssl trust-point ASDM_Launcher_Access_TrustPoint_0 inside vpnlb-ip
webvpn
port 4433
enable outside
dtls port 4433
http-headers
hsts-server
enable
max-age 31536000
include-sub-domains
no preload
hsts-client
enable
x-content-type-options
x-xss-protection
content-security-policy
anyconnect image disk0:/anyconnect-win-4.9.04043-webdeploy-k9.pkg 1
anyconnect enable
cache
disable
error-recovery disable
group-policy GroupPolicy_EHSVPN internal
group-policy GroupPolicy_EHSVPN attributes
wins-server none
dns-server value 10.0.100.200 8.8.8.8
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-session-timeout alert-interval none
vpn-filter value inside_access_in
vpn-tunnel-protocol ikev2 ssl-client ssl-clientless
group-lock value EHSVPN
default-domain value ehs.local
vlan none
address-pools value VPN-IP-Range
smartcard-removal-disconnect enable
security-group-tag none
periodic-authentication certificate none
vpn-simultaneous-login-delete-no-delay

Any help would be appreciated!

Thanks!

[MHM Cisco World]

tunnel-group <NAME> general-attributes 

 authentication-server-group <NAME> LOCAL <<- this command i DONT SEE

Cisco AnyConnect With Server 2016 NPAS (RADIUS) Different Groups | PeteNetLive

MHM

[Rob Ingram]

@philipvoceehs Running the authentication test from ASDM just confirms authentication is working, but have you configured the authentication-server-group under the tunnel-group/connection profile?

Example:

tunnel-group RAVPN general-attributes
 authentication-server-group ISE

[philipvoceehs]

Hi Rob,

Seems our config is dotted around the running config. We have these lines:

tunnel-group EHSVPN type remote-access
tunnel-group EHSVPN general-attributes
address-pool VPN-IP-Range
authentication-server-group EHS
default-group-policy GroupPolicy_EHSVPN
tunnel-group EHSVPN webvpn-attributes
group-alias EHSVPN enable
tunnel-group EHSVPN ipsec-attributes

Thanks!

[MHM Cisco World]

ciscoasa#debug radius <<- share this

also the user for Access ASA is different than user access anyconnect in attributes return from radius 
share the debug let see what radius retrun to ASA and then we need to modify I think the radius 

MHM

[MHM Cisco World]

vpn-simultaneous-logins 3 <<- this limit the access to this group for only three users 
if you do 
show vpn db and you see three user active then new user is reject by ASA

MHM

[philipvoceehs]

We have 0 connected currently

[MHM Cisco World]

show vpn-sessiondb anyconnect <<- do this to be more check

[philipvoceehs]

0 connected

[MHM Cisco World · Accepted solution]

debug radius 
debug webvpn anyconnect 

I need to see both of these debug

MHM

[Rob Ingram]

@philipvoceehs and do you connect to the tunnel-group called EHSVPN or the default?

If EHSVPN then do you see anything in the RADIUS server logs when authentication fails?

[philipvoceehs]

Hi Rob,

We are strangely seeing successful authentication against the radius server but the ASA still presents login failed so we're not sure where to look next?