anyconnect upgrade issue

[Rock29]

The issue occurs on either Windows 10 or 11, all users are affected.

If 4.10.03.104 of anyconnect is installed but hasn’t been used, then 4.10.07073 is installed, you can connect to the VPN with no issue.

If you install 4.10.03.104 of anyconnect, use it to connect to the VPN and then install 4.10.07073 you can no longer access the VPN and get the error message shown in the previous pictures from when I raised the ticket.

[balaji.bandi]

why do you need 2 version ?

[Rock29]

System are running with old version 4.10.03.104. I don't think, it's possible to upgrade in a day for all users. So for the time being we should have both the versions enable. 

[balaji.bandi]

Instead lets have old one using old anyconenct and new one use new version (rather installing both ?)

this can be pushed based on the group and device belongs to .

[Rock29]

Is there any reason why it is not working as mentioned below. 

If 4.10.03.104 of anyconnect is installed but hasn’t been used, then 4.10.07073 is installed, you can connect to the VPN with no issue.

If you install 4.10.03.104 of anyconnect, use it to connect to the VPN and then install 4.10.07073 you can no longer access the VPN and get the error message shown in the previous pictures from when I raised the ticket.