05-08-2013 08:03 PM - edited 02-21-2020 06:53 PM
dear all experts,
Need urgent help.
I have this AnyConnect that works perfect with Windows and now my MD would like to run it on iPad.
So i went to AppsStore and found the application called "AnyConnect Secure Mobility Client" but failed to connect with the error message attached
Any clue ?
thanks in advance !
Solved! Go to Solution.
05-08-2013 08:20 PM
Hi
I believe you need the AnyConnect for Mobile license.
It is a 1 time license for all mobile devices.
Thanks
Paul
05-08-2013 08:25 PM
Your ASA needs to have the AnyConnect for Mobile license added. It's ~USD100 price and the part number varies by which ASA model you have. See the data sheet here.
I'm guessing you have the 5505 so you would need part number L-ASA-AC-M-5505=
06-27-2013 03:58 AM
Browse to https://tools.cisco.com/SWIFT/LicensingUI/Quickstart (or www.cisco.com/go/license) and enter your PAK. That will get you an activation key. Then enter it on your ASA, either via ASDM or command line. The instructions are in the configuration guide here (CLI) and here (ASDM).
05-08-2013 08:20 PM
Hi
I believe you need the AnyConnect for Mobile license.
It is a 1 time license for all mobile devices.
Thanks
Paul
05-14-2013 04:35 PM
hey mate
my vendor says the price is per unit base
means if i would like to have 5 ipad login using AnyConnect VPN client then i would require 5 pcs of Mobile License.
is this true ?
thanks !
05-14-2013 05:37 PM
That is incorrect. Only one AnyConnect for Mobile license is required.
05-08-2013 08:25 PM
Your ASA needs to have the AnyConnect for Mobile license added. It's ~USD100 price and the part number varies by which ASA model you have. See the data sheet here.
I'm guessing you have the 5505 so you would need part number L-ASA-AC-M-5505=
06-26-2013 10:44 PM
thanks guy, i got the PRODUCT AUTHORIZATION KEY now but how to enable/activate it ?
thanks !
06-27-2013 03:58 AM
Browse to https://tools.cisco.com/SWIFT/LicensingUI/Quickstart (or www.cisco.com/go/license) and enter your PAK. That will get you an activation key. Then enter it on your ASA, either via ASDM or command line. The instructions are in the configuration guide here (CLI) and here (ASDM).
06-30-2013 06:48 PM
thanks expert !! you are my savior !
the activation was done but i receive another error message while using my iphone loggin into the VPN
"VPN Server could not parse request"
any idea ?
thanks !
07-01-2013 06:56 AM
You're welcome.
The issue you are seeing now could be due to your password having a special character. Please see this thread for further description.
05-08-2013 08:27 PM
OK thanks for the advice
I will check with local Cisco disti.
best regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide