cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
278
Views
0
Helpful
1
Replies

ASA 5512-x Anyconnect partially working

nathan demers
Level 1
Level 1

Here is the issue.

Anyconnect connects and functions as intended for the split tunnel with a destination of 192.168.166.0/24  It does not work for 192.168.55.4 /30.  The configuration is the same for both.  I have static no nat statements and interesting traffic ACLs assigned.  There is a little bit of extra code in here due to me playing with this to get it to work.  I have not rebooted this yet because it is in production.  I just need a sanity check because everything is identical for the two subnets. I want to be able to reach the Inside interface and the Inside-166 interfaces.  This will prepare me for expanding access via anyconnect to additional resources internally.

 

SSL-Anyconnect

Working - 192.168.166.0/24

Broken - 192.168.55.4 /30

 


: Hardware:   ASA5512, 4096 MB RAM, CPU Clarkdale 2793 MHz, 1 CPU (2 cores)
:
ASA Version 9.4(1) 
!
hostname examplecom-ASA
domain-name examplecom911.com
enable password KKZEMuUIl6k9bTx9 encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
names
ip local pool SSLClientPool 192.168.201.1-192.168.201.50 mask 255.255.255.0
!
interface GigabitEthernet0/0
 description Global Internet for all devices - Minus 166
 nameif Outside-Internet
 security-level 0
 ip address 192.168.55.2 255.255.255.252 
!
interface GigabitEthernet0/1
 description DIA to Internet for 192.168.166.0/24
 nameif Outside-166
 security-level 0
 ip address dhcp setroute 
!
interface GigabitEthernet0/2
 description Subnet for Internet Access for 911 Call responders
 nameif Inside-166
 security-level 100
 ip address 192.168.166.1 255.255.255.0 
 policy-route route-map RM_166_INTERNET
!
interface GigabitEthernet0/3
 description Internal Global Network for all devices.
 nameif Inside
 security-level 100
 ip address 192.168.55.5 255.255.255.252 
!
interface GigabitEthernet0/4
 shutdown     
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet0/5
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Management0/0
 management-only
 nameif MGMT
 security-level 0
 ip address 192.168.174.250 255.255.255.0 
!
boot system disk0:/asa941-smp-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns server-group DefaultDNS
 domain-name examplecom911.com
same-security-traffic permit inter-interface
object network PAT_166
 subnet 192.168.166.0 255.255.255.0
object network ANYCONNECT_201
 subnet 192.168.201.0 255.255.255.0
object network NETWORK_OBJ_192.168.201.0_26
 subnet 192.168.201.0 255.255.255.0
object-group network 166-SUBNET
 network-object 192.168.166.0 255.255.255.0
object-group network NO_NAT_ANYCONNECT
 network-object 192.168.201.0 255.255.255.0
object-group network NO_NAT_ADMIN
 network-object 192.168.174.0 255.255.255.0
object-group network NO_NAT_VPN_166
 network-object 192.168.166.0 255.255.255.0
access-list PBR_166_INTERNET standard permit 192.168.166.0 255.255.255.0 
access-list PBR_DEFAULT_TRAFFIC standard permit any4 
access-list 166_PUBLIC_IN extended permit ip 192.168.201.0 255.255.255.0 192.168.166.0 255.255.255.0 log 
access-list 166_PUBLIC_IN extended permit ip 192.168.201.0 255.255.255.0 192.168.55.4 255.255.255.252 log 
access-list INSIDE-166-ACL extended permit ip any any 
access-list INSIDE-IN extended permit ip any any 
access-list split-tunnel standard permit 192.168.166.0 255.255.255.0 
access-list split-tunnel standard permit 192.168.174.0 255.255.255.0 
access-list split-tunnel standard permit 192.168.55.4 255.255.255.252 
pager lines 24
logging enable
logging timestamp
logging buffer-size 1000000
logging monitor debugging
logging buffered debugging
logging trap informational
logging asdm informational
logging debug-trace
mtu Outside-Internet 1500
mtu Outside-166 1500
mtu Inside-166 1500
mtu Inside 1500
mtu MGMT 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-741.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (Inside-166,Outside-166) source dynamic any interface
nat (Inside-166,Outside-166) source static any any destination static NETWORK_OBJ_192.168.201.0_26 NETWORK_OBJ_192.168.201.0_26 no-proxy-arp route-lookup
nat (Inside,Outside-166) source static any any destination static NETWORK_OBJ_192.168.201.0_26 NETWORK_OBJ_192.168.201.0_26 no-proxy-arp route-lookup
access-group 166_PUBLIC_IN in interface Outside-166
access-group INSIDE-IN in interface Inside
!
route-map RM_166_INTERNET permit 10
 match ip address PBR_166_INTERNET
 set interface Outside-166

!
router eigrp 1
 network 192.168.166.0 255.255.255.0
 network 192.168.55.4 255.255.255.252
!
route Outside-166 0.0.0.0 0.0.0.0 9.9.9.1 1
route MGMT 192.168.174.0 255.255.255.0 192.168.174.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL 
http server enable
http 192.168.174.0 255.255.255.0 MGMT
http 67.161.108.98 255.255.255.255 Outside-166
no snmp-server location
no snmp-server contact
crypto ipsec ikev1 transform-set TS_ESP_3DES_SHA esp-3des esp-sha-hmac 
crypto ipsec ikev1 transform-set TS_ESP_3DES_MD5 esp-3des esp-md5-hmac 
crypto ipsec ikev1 transform-set TS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac 
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
 enrollment self
 fqdn none
 subject-name CN=192.168.174.250,CN=examplecom-ASA
 keypair ASDM_LAUNCHER
 crl configure
crypto ca trustpoint localtrust
 enrollment self
 fqdn sslvpn.examplecom911.info
 subject-name CN=sslvpn.examplecom911.info
 keypair sslvpnkey
 crl configure
crypto ca trustpool policy
crypto ca certificate chain ASDM_Launcher_Access_TrustPoint_0
--omitted--

crypto ikev1 policy 10
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 28800
crypto ikev1 policy 20
 authentication pre-share
 encryption 3des
 hash md5
 group 2
 lifetime 28800
crypto ikev1 policy 30
 authentication pre-share
 encryption aes-256
 hash sha
 group 5
 lifetime 28800
telnet timeout 5
ssh stricthostkeycheck

ssh timeout 60
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access Inside-166
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 192.168.174.9 source MGMT prefer
ssl trust-point localtrust Outside-166
ssl trust-point ASDM_Launcher_Access_TrustPoint_0 MGMT
ssl trust-point ASDM_Launcher_Access_TrustPoint_0 MGMT vpnlb-ip
webvpn
 enable Outside-166
 anyconnect image disk0:/anyconnect-win-3.1.10010-k9.pkg 1
 anyconnect enable
 tunnel-group-list enable
 error-recovery disable
group-policy SSLCLient internal
group-policy SSLCLient attributes
 banner value ****************************
 banner value Authorized exampleCom Admins Only
 banner value ****************************
 dns-server value 9.9.9.1 4.4.2.2
 vpn-tunnel-protocol ssl-client 
 re-xauth enable
 pfs enable
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value split-tunnel
 default-domain value examplecom911.info
 address-pools value SSLClientPool
group-policy GroupPolicy_exampleCOM_ANYCONNECT internal
group-policy GroupPolicy_exampleCOM_ANYCONNECT attributes
 wins-server none
 dns-server value 9.9.9.1 4.4.2.2
 vpn-tunnel-protocol ssl-client 
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value split-tunnel
 default-domain value examplecom911.com
 split-tunnel-all-dns disable
dynamic-access-policy-record DfltAccessPolicy
username example_brad password Fk3MzOeAau1lt.2O encrypted
username example_brad attributes
 service-type remote-access
username examplecom password KF.aA.oQrkSpW2BY encrypted
username example_josh password .PZSPsFZj/qTuAND encrypted
username example_josh attributes
 service-type remote-access
username example_jerry password KF.aA.oQrkSpW2BY encrypted
username example_jerry attributes
 service-type remote-access
tunnel-group SSLClient type remote-access
tunnel-group SSLClient general-attributes
 default-group-policy SSLCLient
tunnel-group SSLClient webvpn-attributes
 group-alias exampleCom-Admins enable

class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum client auto
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect ip-options 
  inspect netbios 
  inspect rsh 
  inspect rtsp 
  inspect skinny  
  inspect esmtp 
  inspect sqlnet 
  inspect sunrpc 
  inspect tftp 
  inspect sip  
  inspect xdmcp 
  inspect icmp 
!
service-policy global_policy global
prompt hostname context 
no call-home reporting anonymous
call-home
 profile CiscoTAC-1
  no active
  destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
  destination address email callhome@cisco.com
  destination transport-method http
  subscribe-to-alert-group diagnostic
  subscribe-to-alert-group environment
  subscribe-to-alert-group inventory periodic monthly 5
  subscribe-to-alert-group configuration periodic monthly 5
  subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:cc456cfabf1392fc7fefec51737a9a30
: end

1 Reply 1

nathan demers
Level 1
Level 1

Wanted to follow up on the solution.

The issue is the following: management-access Inside-166

That command allows me access the 192.168.166.1 address for management purposes but the 55.5 address is not accessible.  If I change the management access command to Inside instead of Inside-166 then the 55.5 address is available for icmp.  Once I setup ospf on the opposite side of the 55.x then I could reah the opposing side but could not manage the 55.5 still.  

So Anyconnect was not broken just giving a false representation of broken based on ignorance.