05-25-2016 11:52 AM
Hi all,
Please be nice, I am after some help with connecting my ASA to a VPN service from a site called total VPN. My aim is to route all traffic (inside) to my outside interface over the tunnel to the VPN server . I have my ASA connected to the BT hub and it dials out to get my wan ip and all my clients can get on the internet, From here I am a bit stuck. Any pointers would be great.
05-25-2016 01:19 PM
I would contact the VPN provider and get some help from them. After all, it is there business.
05-25-2016 11:40 PM
I did contact them and the said use open VPN. I can not find any documentation that ASA support this.
05-25-2016 11:54 PM
you need help in configuring your ASA with VPN configuration ?
05-26-2016 12:24 PM
Yes I do, it's more of a point to point ipsec tunnel I think. I want to point all my traffic over the tunnel to a VPN provider ( pure VPN )
05-26-2016 05:31 PM
Hi Neil,
Here is a doc for setting up the site to site tunnel on the ASA:
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/119141-configure-asa-00.html
Regards,
Aditya
Please rate helpful posts and mark correct answers.
05-26-2016 11:43 AM
OpenVPN is a proprietary SSL VPN solution. You wont be able to build a site to site VPN with that using a Cisco ASA.
05-26-2016 12:22 PM
I know openVPN is not supported as I can not find any info on it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: