09-14-2010 04:10 PM
Hello,
I am configuring an ASA 5505 for remote users to access a network. VPN users can authenticate against the domain controller, connect and obtain a vaild IP. The local DNS server is resolving domain names for the users as well and the remote users can access all systems behind the ASA. Users are not able to access the internet once connected.
The config is posted below does anyone see anything funky?
: Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name domain.local enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted names name 192.168.21.0 RemoteUsersSubnet description VPN User Subnet name 192.168.20.2 domaincontroller description Domain Controller ! interface Vlan1 nameif inside security-level 100 ip address 192.168.20.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XXX.XXX.XXX.XXX 255.255.255.252 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! banner login
ftp mode passive dns server-group DefaultDNS domain-name DOMAIN
same-security-traffic permit intra-interface access-list inside_access_in extended permit ip 192.168.20.0 255.255.255.0 any access-list inside_access_in extended permit ip RemoteUsersSubnet 255.255.255.0 any access-list outside_access_in extended permit ip RemoteUsersSubnet 255.255.255.0 any access-list TestACL standard permit host 0.0.0.0 access-list inside_nat0_outbound extended permit ip any RemoteUsersSubnet 255.255.255.0 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool RemoteUsers 192.168.21.10-192.168.21.40 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.20.0 255.255.255.0 nat (outside) 0 RemoteUsersSubnet 255.255.255.0 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute aaa-server DOMAIN protocol nt aaa-server DOMAIN (inside) host DOMAINCONTROLLER
nt-auth-domain-controller 192.168.20.2 aaa authentication ssh console LOCAL http server enable http XXX.XXX.XXX.XXX 255.255.255.255 outside http RemoteUsersSubnet 255.255.255.0 inside http 192.168.20.0 255.255.255.0 inside http 192.168.1.0 255.255.255.0 inside http XXX.XXX.XXX.XXX 255.255.255.255 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 40 set pfs group1 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 20 telnet timeout 5 ssh XXX.XXX.XXX.XXX 255.255.255.255 outside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! group-policy DfltGrpPolicy attributes banner none wins-server value 192.168.20.2 dns-server value 192.168.20.2 dhcp-network-scope none vpn-access-hours none vpn-simultaneous-logins 3 vpn-idle-timeout 30 vpn-session-timeout none vpn-filter none vpn-tunnel-protocol IPSec l2tp-ipsec webvpn password-storage disable ip-comp disable re-xauth disable group-lock none pfs disable ipsec-udp disable ipsec-udp-port 10000 split-tunnel-policy tunnelall split-tunnel-network-list none default-domain none split-dns none intercept-dhcp 255.255.255.255 disable secure-unit-authentication disable user-authentication disable user-authentication-idle-timeout 30 ip-phone-bypass disable leap-bypass disable nem disable backup-servers keep-client-config msie-proxy server none msie-proxy method no-modify msie-proxy except-list none msie-proxy local-bypass disable nac disable nac-sq-period 300 nac-reval-period 36000 nac-default-acl none address-pools none smartcard-removal-disconnect enable client-firewall none client-access-rule none webvpn functions url-entry html-content-filter none homepage none keep-alive-ignore 4 http-comp gzip filter none url-list none customization value DfltCustomization port-forward none port-forward-name value Application Access sso-server none deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information svc none svc keep-installer installed svc keepalive none svc rekey time none svc rekey method none svc dpd-interval client none svc dpd-interval gateway none svc compression deflate group-policy RemoteUsers internal group-policy RemoteUsers attributes banner value wins-server value 192.168.20.2 dns-server value 192.168.20.2 vpn-tunnel-protocol IPSec password-storage enable ipsec-udp enable split-tunnel-policy excludespecified split-tunnel-network-list value TestACL default-domain value DEFAULTDOMAIN
backup-servers clear-client-config address-pools value RemoteUsers username ADMIN password FaKbw/.bzwrZp.L3 encrypted privilege 15 tunnel-group DefaultRAGroup general-attributes dhcp-server DOMAINCONTROLLER
tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group RemoteUsers type ipsec-ra tunnel-group RemoteUsers general-attributes address-pool RemoteUsers authentication-server-group DOMAIN LOCAL default-group-policy RemoteUsers tunnel-group RemoteUsers ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp ! service-policy global_policy global prompt hostname context Cryptochecksum:df34902825b1b9836c79d5a907ef124c : end asdm image disk0:/asdm-524.bin asdm location DOMAINCONTROLLER 255.255.255.255 inside asdm location 0.0.0.0 255.255.255.255 inside asdm history enable
09-14-2010 04:28 PM
which group policy you are using,can you confgure split tunnel as per
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml
09-14-2010 06:59 PM
Thanks for the quick reply. I am using the RemoteUsers policy group and I was able to setup split tunnels and maintain internet connectivty. However, I am unable to ping or access the ASA device as a remote VPN user and would like to tunnel all user traffic through the VPN. Any thoughts?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide