I am new in Cisco firewalls and keen to learn and for that reason I bought a ASA5505. I have been following guilds to do the basic setup and a basic VPN connection but once the VPN tunnel is established I cant ping any local resources just the outside ASA interface IP Address.
I used the below video for the basic configuration.
How to Setup a New Cisco ASA 5505
https://www.youtube.com/watch?v=hdgFBfs6xu4
I have ran through both the below tutorials to setup a VPN but neither worked. From research I learned about the command "sysopt connection permit-vpn" to allow the traffic to bypass interfaces access lists but it didn't help either.
Cisco ASA - Remote Access VPN (IPSec)
https://www.youtube.com/watch?v=ff6r_ti3lr4
Cisco ASA 5500 Client To Site VPN
https://www.youtube.com/watch?v=-cKXOlKlyRQ
I have configured the ASA from factory default configuration many times trying different things and have attached my latest attempt. I believe the issue is due to the ASA treating the VPN subnet as a outside address and blocking local access. I attempted to add ACLs to permit access but they had no effect. I would really appreciate some pointers for why I cant access local server\PC or ping them when connected through VPN.
