11-18-2016 01:29 AM
Hello,
are there any possibilitys to add the connectinginformations to the installer of Anyconnect VPN Client.
Because the users don't want to type in the secure gateway everytime when they want to connect.
Thanks in advance,
TE
11-23-2016 05:36 AM
Hi t.eichinger,
You can definitely do it, creating a server list on your AnyConnect profile will do it, you can take a look to the following guide:
http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/ac03vpn.html#89103
Also i have some screenshots that may help you as well:
Step 1 create the profile:
Step 2 edit the profile and create the server list:
After that you need to connect successfully one time to the AnyConnect so the profile is going to be downloaded in the computer, and the second time you connect the secure gateway is going to show up automatically on the AnyConnect.
Hope this info helps!!
Rate if helps you!!
-JP-
11-25-2016 01:12 AM
Thank you very much. I will try that solution definitely :-D
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide