cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
296
Views
0
Helpful
1
Replies

Bandwidth Policy on a Lan-to-Lan VPN

dwessel
Level 1
Level 1

When I try to setup Bandwidth Policy on a Lan-to-Lan VPN I get the following error. I have a VPN Concentrator 3015 on each side.

An error has occurred while attempting to perform the operation.

Error updating bandwidth settings for LAN-to-LAN connection (General Error).

1 Reply 1

awaheed
Cisco Employee
Cisco Employee

Hi,

Make sure that you have a Bandwidth policy defined and then try applying it to the LAN to LAN tunnel. If you have followed Cisco document and are still seeing a problem, go ahead and open a TAC case and someone will troubleshoot this with you.

Hope this helps,

Thanks and Regards,

Aamir Waheed,

Cisco Systems, Inc.

CCIE#8933

-=-=-=-