BRI DDR into Microsoft RAS

[_Luke_]

Dear all,

I have been trying to set up a router to dial in to a MS2k RAS box (BRI to PRI). I am getting the following error on a ppp auth debug and I'm not sure where to go next. Any advice would be gratefully received.

02:30:18: BR0/0:1 PPP: Using dialer call direction

02:30:18: BR0/0:1 PPP: Treating connection as a callout

02:30:18: BR0/0:1 PPP: Session handle[CD000011] Session id[30]

02:30:18: BR0/0:1 PPP: Authorization required

02:30:18: BR0/0:1 PPP: No remote authentication for call-out

02:30:18: BR0/0:1 PPP: Authorization required

02:30:18: BR0/0:1 PPP: No remote authentication for call-out

02:30:79476411204: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down

02:30:77309411360: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from profile Di1

Regards,

Luke

[Georg Pauwen]

Hello Luke,

judging from your debugging output, it looks like you have configured one-way authentication, that is, your client will not request that the server authenticate itself back to the client.

Check if your server might be configured for two-way authentication. On your client, if you have 'ppp authentication pap (chap) callin' configured, take out the 'callin' keyword and check if that makes a difference...

Regards,

GP

[_Luke_]

Dear GP,

Thank you that's solved the problem!

Regards,

Luke