10-19-2011 12:16 PM
We have a VPN 3005 Concentrator. The user was able to login to Cisco VPN client successfully. However, she is not able to access the internal network. The tunnel was setup as a split-tunnel. Do you have any suggestions?
Thanks.
Diane
10-19-2011 12:19 PM
The computer is running Windows 7 64-bit.
10-19-2011 12:24 PM
take route print from pc before and after connecting and see if the split tunnel route is getting pushed or not ?
If it does not check firewall if it does check local windows firewall antivirus or windows defender settings.
HTH
Rahul
10-19-2011 02:51 PM
Thanks for your prompt response, Rahul.
I took the Route Print before and after and split tunnel route was pushed. The Windows firewall was turned off. She does not have any Antivirus software installed. The Cisco VPN client was able to connect, but there is no access on the internal nnetwork.
Can we have Shrew software and Cisco VPN client installed on the same computer?
Thanks.
Diane
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide