07-12-2012 09:57 PM - edited 02-21-2020 06:11 PM
Hi all.
Can we make IPSec VPN tunnel (Site to Site) on Cisco Router 3825C.
If we can, which IOS supports?
Pls help me to solve this problem.
Thanks to all.
Vinh Phan
07-13-2012 07:46 AM
Yes... we can make...
IPSec VPN
The Cisco 3800 Series Module (AIM-VPN/SSL-3) can provide hardware-based IPSec encryption services of 160 and 185 Mbps in the Cisco 3825 and 190 and 210 Mbps in the Cisco 3845 (IPSec IMIX and 1400-byte packets).
But make sure that your router is not C3825-NOVPN model.... NOvpn models have limited security features.....
for use make use of the security bundle......
07-13-2012 01:49 PM
Hi,
Make sure your IOS includes cryptographic support (k9) and that the previous post is true.
Thanks.
07-13-2012 10:19 PM
Hi all.
Thanks for your respond.
But I can't find any IOS for Router 3825C support VPN.
When I use 3825 IOS, router can't run.
I read that they can only support SSL VPN with IOS 3825c-spservice. . .
07-14-2012 01:43 PM
Hi Vinh,
Please attach the "show version" output of your Router.
Thanks.
07-15-2012 06:25 PM
Router#show version
Cisco IOS Software, 3800C Software (C3825C-SPSERVICESK9-M), Version 15.0(1)M8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 16-Feb-12 03:18 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T15, RELEASE SOFTWARE (fc1)
Router uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c3825c-spservicesk9-mz.150-1.M8.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco CISCO3825C/K9 (revision 1.2) with 488447K/35840K bytes of memory.
Processor board ID FGL161411MJ
6 FastEthernet interfaces
2 Gigabit Ethernet interfaces
DRAM configuration is 64 bits wide with parity enabled.
447K bytes of NVRAM.
126976K bytes of ATA System CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO3825C/K9 FGL161411MJ
Configuration register is 0x2102
Hi Javier.
This is details of "show version" command.
Pls help me check.
Thanks and Best Regards,
Vinh Phan
07-16-2012 07:56 AM
Dear Vinh,
Please check the following IOS image:
c3825-advsecurityk9-mz.151-4.M4.bin
http://tools.cisco.com/squish/23783
Please check the IOS requirements, I would do it for you but I am at work right now and working on multiple issues
Keep me posted.
07-16-2012 06:32 PM
Dear Javier.
Thanks for your support.
I checked with your IOS:
c3825-advsecurityk9-mz.151-4.M4.bin
But it didn't work.
After that when I used IOS
c3825c-advipservicesk9-mz.150-1.M8.bin
It's now ok.
Notice that you can't use IOS c3825-.... for router 3825C/K9.
You must use IOS c3825c-...
Thanks all!
Best Regards,
Vinh Phan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide