07-29-2008 11:47 AM - edited 02-21-2020 03:51 PM
Hi all.I have recently configured an ASA 5510 to allow remote access using Cisco VPN client. The problem is that everything works fine when I connect using a classic modem or over a machine with a public address that I use for testing purposes but whenever I try to connect with over an ADSL line I cannot gain access to the resources. I login and after that nothing, I can't reach anything.
I'm attaching the relevant configuration information in the attachment.All help is most welcome.
Solved! Go to Solution.
07-29-2008 12:14 PM
Depending on version, add..
isakmp nat-traversal
or
crypto isakmp nat-traversal
Should be all you need.
07-29-2008 12:14 PM
Depending on version, add..
isakmp nat-traversal
or
crypto isakmp nat-traversal
Should be all you need.
07-29-2008 12:40 PM
Thanks that did it. I can ping and access resources without problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide