Cannot connect using Cisco VPN client

[IgorHamzic]

Hi all.I have recently configured an ASA 5510 to allow remote access using Cisco VPN client. The problem is that everything works fine when I connect using a classic modem or over a machine with a public address that I use for testing purposes but whenever I try to connect with over an ADSL line I cannot gain access to the resources. I login and after that nothing, I can't reach anything.

I'm attaching the relevant configuration information in the attachment.All help is most welcome.

[acomiskey · Accepted solution]

Depending on version, add..

isakmp nat-traversal

or

crypto isakmp nat-traversal

Should be all you need.

[IgorHamzic]

Thanks that did it. I can ping and access resources without problem.