Cisco 5512-X Site to Site VPN Access Rules

[adrnlnfrik]

Hello world,

I have recently upgraded from a Cisco Pix 515E to a Cisco ASA 5512-X. 

I am obviously having trouble considering the changes implemented in 8.2.

I have set up the wan and lans appropriately, as well as the VPN's. 

Everything is working at my location, and the VPN's are established as well.

I would like to be able to have full access in between all three VPN's and my

location considering our web, email, DVR, and database servers are here.

I can't seem to ping or access my off site routers GUI pages the way I can with the PIX.

When I establish the mirrored rules on the firewall, I am able to do these things, but I lose internet

at my current location.

I'm begging to become cross-eyed.

Can anyone help??

Thank you in advance.

[Andrew Phirsov]

From what you've posted, its hard to propose anything) Would be better if you provide the config of your ASA and describe the problem more clearly.

For know, check if you've got proxy-acls properly configured (so they include all the traffic you're trying to protect), nat-exemption rules configured for all vpn-traffic and nat rules themselves configured properly, correct routing in place between all the peers, etc.

Again, with no config and so little info, it's hard to say smth)