CISCO 831/K9 to CISCO 836-SEC-I-K9 dynamic ADSL Tunnel

[Robert_Berger]

Hello everybody,

i have a very interesting Problem. Tunnel connection is fine but only one workstation is running well. The others are have good ping connection (from each side) but no proxy and some times a telnet connection ??

831 with fixed IP Adresse and 2 side-to-side, 1 dynamic side-to-side (having this problem) and 1 dynamic for VPN client

836 ADSL have only the one side-to-side tunnel to the 831. Using dynamic IP-Adress from ADSL austria.

Attachment: Full config of 836 and part of 831

Maybe there is a mistake i can not see at my own.

thanks for help, Robert

[Philip D'Ath]

Try this on both sites:

interface Dialer1 (or whatever your using)

no ip route-cache

no ip mroute-cache