Hello Seniors,
I was trying to establish a site-to-site vpn ( crypto isakmp policy configuration) using a cisco 1841 router.I realised that the router (1841) is not supporting the configuration.
We decided to enchance the router by the addition of a security module(AIM VPN SSL) but to our suprise,it cannot still support the crypto configuration.
When i inserted the module into the router,i did'nt realised any change "say a new hardward found."
Can any one help configure this card.
This is the show version of my router.
Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(3i), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 28-Nov-07 18:17 by stshen
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Gamcel-Kairaba uptime is 17 hours, 4 minutes
System returned to ROM by power-on
System image file is "flash:c1841-ipbase-mz.124-3i.bin"
Cisco 1841 (revision 7.0) with 114688K/16384K bytes of memory.
Processor board ID FHK1242203X
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
31360K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
I thank you in advance for your help.
