cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
353
Views
0
Helpful
0
Replies

Cisco ASA 5520 AnyConnect Mobile evaluation license

joeyx31x13
Level 1
Level 1

Hi All,

Hope everyone is doing well.  First time posting, so hopefully you experts can help me answer the questions.  Thanks in Advance!

Recently submitted and received the 90-days demo and evaluation license for AnyConnect for Mobile on my ASA 5520 router.  I understand how to install the activation key into the ASA 5520 router, but i have a question regarding to the features this evaluation license comes with.  From the email i got, it stated


Failover                                 : Enabled  
Encryption-DES                           : Enabled  
Encryption-3DES-AES                      : Disabled 
Security Contexts                        : Default  
GTP/GPRS                                 : Disabled 
AnyConnect Premium Peers                 : Default  
Other VPN Peers                          : Default  
Advanced Endpoint Assessment             : Disabled 
AnyConnect for Mobile                    : Enabled         (what i am interested in ONLY)
AnyConnect for Cisco VPN Phone           : Disabled 
Shared AnyConnect Premium License server : Disabled 
Shared License                           : Disabled 
UC Phone Proxy Sessions                  : Default  
Total UC Proxy Sessions                  : Default  
AnyConnect Essentials                    : Disabled 
Botnet Traffic Filter                    : Disabled 
Intercompany Media Engine                : Disabled 
Cluster License                          : Disabled 
vCPUs                                    : 0

 

By installing the evalution license onto the ASA box, will it overrides some of the exsiting features on my ASA 5520 which had the premium license? Below is my license snippet which i believe I am covered for the AnyConnect SSL connectivity.  Also if this evaultion license does not work out, would it be possible to remove? and how so? reboot the router without writing to the memory?  Thanks.

 

Cisco Adaptive Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(5)51

Compiled on Thu 07-Aug-08 20:53 by builders
System image file is "disk0:/asa804-k8.bin"
Config file at boot was "startup-config"

CiscoASA-5520 up 9 days 12 hours

Hardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB

Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : ☻CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: ♥CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode  : ☺CNlite-MC-IPSECm-MAIN-2.05
 0: Ext: GigabitEthernet0/0  : address is 001b.d5e8.e304, irq 9
 1: Ext: GigabitEthernet0/1  : address is 001b.d5e8.e305, irq 9
 2: Ext: GigabitEthernet0/2  : address is 001b.d5e8.e306, irq 9
 3: Ext: GigabitEthernet0/3  : address is 001b.d5e8.e307, irq 9
 4: Ext: Management0/0       : address is 001b.d5e8.e303, irq 11
 5: Int: Not used            : irq 11
 6: Int: Not used            : irq 5

Licensed features for this platform:
Maximum Physical Interfaces  : Unlimited
Maximum VLANs                : 150
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled
VPN-3DES-AES                 : Enabled         (Will this feature be disabled by the Evaluation License which said "Disabled")
Security Contexts            : 2
GTP/GPRS                     : Disabled
VPN Peers                    : 750
WebVPN Peers                 : 10
AnyConnect for Mobile        : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions            : 2

This platform has an ASA 5520 VPN Plus license.

 

 

0 Replies 0