Cisco IPsec vpn clients and internal DHCP server
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2012 12:52 PM - edited 02-21-2020 05:56 PM
Is it possible to allow a Cisco VPN client that connects to an ASA to recieve its IP address from a MS dhcp server that is on the inside network behind the ASA? Any examples?
- Labels:
-
IPSEC
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2012 01:00 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2012 09:55 PM
In addition to the previous post, please remember that the DHCP server will respond back to the network-scope, so if needed, make sure that your internal routing points to the ASA in order to reach this particular pool.
Thanks.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2012 11:17 PM
Javier, if my inside is 192.168.10.0 /24 and I would like my VPN users to receive 172.16.1.0 /24, would I add the 172.16.1.0 network to the network interface card on the DHCP server, or have a sub interface from the inside?
