04-19-2005 04:58 AM - edited 02-21-2020 01:43 PM
I want users on 192.168.x.0 to aloud ONLY 216.x.x.2 traffic out. but the rest are going via the vpn tunnel. see below config.please help
PIX Version 6.3(3)
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list vpntraffic permit ip 192.168.x.0 255.255.255.0 any
access-list nonat deny ip 192.168.x.0 255.255.255.0 host 216.x.x.2
access-list nonat permit ip 192.168.x.0 255.255.255.0 any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 216.64.x.x 255.255.255.248
ip address inside 192.168.x.x 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 216.6x.x.x 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set city-atl esp-3des esp-md5-hmac
crypto map VPN 10 ipsec-isakmp
crypto map VPN 10 match address vpntraffic
crypto map VPN 10 set peer 12.16.x.x
crypto map VPN 10 set transform-set city-atl
crypto map VPN interface outside
isakmp enable outside
isakmp key ******** address 12.16.x.x netmask 255.255.255.255
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
telnet timeout 5
ssh x.x.x.x 255.255.255.248 outside
ssh x.x.x.x 255.255.255.248 outside
ssh x.x.x.x 255.255.255.240 outside
ssh 10.x.0.0 255.255.0.0 outside
ssh 10.x.0.0 255.255.0.0 outside
ssh 12.16.x.x 255.255.255.248 outside
ssh 192.168.x.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:xxx
: end
Second config:
access-list nonat deny ip 192.168.x.0 255.255.255.0 host 10.2.0.6
access-list secrets permit ip 192.168.x.0 255.255.255.0 host 216.48.x.x
access-list secrets permit ip any host 216.48.x.x
no nat (inside) 1 0.0.0.0 0.0.0.0 0 0
nat (inside) 1 access-list secrets
Let me know your advise. Please help with best and thanks in advance.
thx
04-19-2005 07:53 AM
For you all who did not reply my problem thank you. I found the correct statement and everything is resolved.
thx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide