05-04-2016 10:50 AM - edited 02-21-2020 08:48 PM
hi, i was in the process of configuring cisco anyconnect vpn for ip phones to our local i did got the license for them either, the issue i get into is that i already configured cisco remote connect via cisco vpn client the old one.
now if i enable the ssl anyconnect on the same outside interface can they both exist without conflicting or i may need to migrate the users to install end client system software for anyconnect in order to connect.
i also need help in certification authentication.
regards
Solved! Go to Solution.
05-05-2016 05:21 AM
You can run both VPN types at the same time without issues.
However you should try and migrate everyone to the newer SSL Anyconnect technology anyway.
05-05-2016 05:21 AM
You can run both VPN types at the same time without issues.
However you should try and migrate everyone to the newer SSL Anyconnect technology anyway.
05-05-2016 10:38 AM
As Philip already said, you can run both. I also recommend that you move to AnyConnect based VPN since the legacy VPN client is end of life and end of support. In fact, I have seen that IPSec client cause some serious OS damage to Windows 8 and Windows 10 machines :)
Thank you for rating helpful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide