Cisco VPN client on 2821

[vijay]

Hi,

Iam running bgp multihoming on cisco 2821 router. I am using loopback 1 as peer ip address for creating lan to lan tunnel with 2 of client network. It is working fine. I wanted to create cisco vpn client for the remote users working from home. I am facing an error message

"%CRYPTO-6-IKMP_MODE_FAILURE: Processing of Aggressive mode

failed with peer at 121.245.52.95 "

Please help me in identify what is the mistake I am doing.

Please find my config file attached for the reference

regard

Vijay

[vijay]

Hi

I am able to connect my vpn client and get the corporate LAN IP address 192.168.127.202. But I am not able to ping any machine in my corporate LAN. Infact I am getting an error message

"%CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSEC packet ha

s invalid spi for destaddr=202.89.118.41, prot=50, spi=0x94040000(2483290112), s

rcaddr=59.161.184.75"

Thanks in advance.

Regards

Vijay