Client Tunnel VPN outbound

[ejpatalon]

(VPN Client)-------------->(PIX 520EU)

(VPN 3000 )<---------------- (VPN Client)

Ever tried to configure this? I have been looking for a way to configure both VPN concentrators to allow VPN clients to pass through to connect to the other side. I'll continue to check for a document to figure out how to allow, (ACL/Ports/Users), VPN client to pass through one firewall and connect to the other.

[sachinraja]

hello

you need to open the required ports on the firewall. The ports that needs to be opened are UDP 500 (IKE) IP port 50 (ESP) & 51 (AH), UDP 4500.

Do let me know if this works..

Why dont you think of setting up a site-to-site VPN instead of this ? This requires a lot of administrative overheads !!