04-22-2013 07:33 AM
CISCO ASA 5520 -K9
ASA Version 8.4(4)1
!
hostname LExfielawASA5520
!
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address a.b.c.d 255.255.255.240
!
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 192.168.1.3 255.255.255.0
!
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
!
ftp mode passive
dns server-group DefaultDNS
domain-name lexfieldlaw.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network inside-network
subnet 192.168.0.0 255.255.0.0
object network vpn1-address
subnet 172.18.30.0 255.255.255.0
object network vpn2-address
subnet 172.18.31.0 255.255.255.0
object-group network vpn
network-object object vpn1-address
network-object object vpn2-address
access-list 50 standard permit any
access-list 60 extended permit icmp any any
access-list 60 extended permit ip any any
access-list 60 extended permit tcp any any
access-list 60 extended permit udp any any
access-list split-tunnel extended permit ip 192.168.0.0 255.255.128.0 172.16.31.0 255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool vpn-pool 172.16.30.2-172.16.30.250 mask 255.255.255.0
ip local pool vpn-pool-yuangong 172.16.31.5-172.16.31.200 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static inside-network inside-network destination static vpn vpn
nat (inside,outside) source dynamic inside-network interface
access-group 60 in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
route inside 192.168.0.0 255.255.128.0 192.168.1.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set test esp-aes esp-sha-hmac
crypto dynamic-map dyn1 10 set ikev1 transform-set test
crypto dynamic-map dyn1 10 set reverse-route
crypto map crymap 10 ipsec-isakmp dynamic dyn1
crypto map crymap interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
crypto isakmp reload-wait
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
console timeout 0
dhcpd auto_config inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption des-sha1
webvpn
group-policy clientvpn1 internal
group-policy clientvpn1 attributes
dns-server value 192.168.0.12
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
username aaa password iEykhCQ1TmA9FWQG encrypted
tunnel-group test type remote-access
tunnel-group test general-attributes
address-pool vpn-pool-yuangong
default-group-policy clientvpn1
tunnel-group test ipsec-attributes
ikev1 pre-shared-key *****
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:f8ee1379f1feeeb1228207b52ad521f5
: end
cisco client vpn 5.007.0440-k9 +win7 X64
Client can connects ASA server and get ip address(172.168.31.X),but can't ping ASA inside interface ip address and other servers in lan .
Could you do me a favor to fix this issue?please tell me the wrong,thanks!
04-22-2013 07:43 AM
Hi,
Can you try the following changes to your configurations and try again
Make new Split Tunnel ACL
access-list split-tunnel-acl standard permit 192.168.0.0 255.255.128.0
Remove the old Split Tunnel ACL and add new one under the "group-policy"
group-policy clientvpn1 attributes
no split-tunnel-network-list value split-tunnel
split-tunnel-network-list value split-tunnel-acl
Add ICMP Inspection on the ASA
policy-map global_policy
class inspection_default
inspect icmp
inspect icmp error
- Jouni
04-22-2013 07:10 PM
Hi,my friend,
I try it and it still can't work .I think the new ACL is the same as old .
Who can help me fix it ?
Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide