Configuration for bundling two BRI interface together

[edmund_liu]

Can someone provide the ISDN DDR solution for configuring two BRI interface ( Bundled together - MPPP ) for achieving 256K bandwidth. I have two seperate ISDN lines and two BRI interfaces installed in the routers at both the point to point sites. The ISDN dialup shall be used as backup link.

[devang_etcom]

look at this link it will help you:http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800a3b7a.shtml

remeber to rate this post if it helps

regards

Devang

[edmund_liu]

Hi Devang,

I have already referred to the site provided by you. However, am concern if the dialer will dial the second dialer string after getting hooked to the first string. In order to achieve 256K bandwidth, the dialer have to dial both the strings.

Regds,