11-23-2017 03:10 AM - edited 03-12-2019 04:45 AM
HI,
I'm trying to have access with VPN client to an internal ASA using static NAT in a router 2951, the router has two ISPs directly connected and is connected inside to an ASA.
The router is using the two external IPs mapped to the same ASA internal IP (outside interface), it is possible?
Sometimes I can connect whit booth external IPs, sometimes only work one and no response from the other, and the opposite, have any idea why?
ISP1 \
ROUTER -- ASA
ISP2 /
Here is the config:
ip nat inside source static udp “ASA-Ouside-IP” 500 “ISP1-IP” 500 extendable
ip nat inside source static udp “ASA-Ouside-IP” 4500 “ISP1-IP” 4500 extendable
ip nat inside source static udp “ASA-Ouside-IP” 500 “ISP2-IP” 500 extendable
ip nat inside source static udp “ASA-Ouside-IP” 4500 “ISP2-IP” 4500 extendable
Thanks
Paulo
11-23-2017 04:05 AM
How the router's routing table looks like?
-If I helped you somehow, please, rate it as useful.-
11-23-2017 06:07 AM
Thanks for the reply
S* 0.0.0.0/0 [1/0] via ISP1
[1/0] via ISP2
Cheers
Paulo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide