10-11-2013 08:11 AM - edited 02-21-2020 07:13 PM
One of our clients employees has a mac running OS 10.6.8. She needs to work from home. We got her set up with the anyconnect client and she can connect to the ASA (5505). But she can't ping any of the interior machines. Swtiching off the firewall on her mac didn't do anything. How do we get her into the network? When we look at the connection, this is what we see:
Cisco AnyConnect Secure Mobility Client Version 3.0.08057
VPN Stats
Bytes Received: 8519
Bytes Sent: 0
Compressed Bytes Received: 0
Compressed Bytes Sent: 0
Compressed Packets Received: 0
Compressed Packets Sent: 0
Control Bytes Received: 1434
Control Bytes Sent: 56
Control Packets Received: 7
Control Packets Sent: 7
Encrypted Bytes Received: 6591
Encrypted Bytes Sent: 3372
Encrypted Packets Received: 15
Encrypted Packets Sent: 21
Inbound Bypassed Packets: 0
Inbound Discarded Packets: 0
Outbound Bypassed Packets: 0
Outbound Discarded Packets: 0
Packets Received: 3
Packets Sent: 0
Time Connected: 00:01:58
Protocol Info
Active Protocol
Protocol Cipher: RSA_AES_128_SHA1
Protocol Compression: LZS
Protocol State: Connected
Protocol: DTLS
Inactive Protocol
Protocol Cipher: RSA_RC4_128_SHA1
Protocol Compression: None
Protocol State: Connected
Protocol: TLS
Routes
Secure Routes
10.0.0.0 255.255.255.0
Firewall Rules
OS Version
Mac OS X 10.6.8
Interfaces
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether c8:2a:14:0e:27:a7
media: autoselect (none)
status: inactive
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr 70:cd:60:ff:fe:69:3d:ba
media: autoselect <full-duplex>
status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 70:cd:60:ff:cf:24
inet6 fe80::72cd:60ff:feff:cf24%en1 prefixlen 64 scopeid 0x6
inet 10.0.0.4 netmask 0xffffff00 broadcast 10.0.0.255
media: autoselect
status: active
utun0: flags=80d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1406
inet 10.0.0.200 --> 10.0.0.200 netmask 0xffffff00
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 10.0.0.1 UGSc 10 0 en1
10/24 link#6 UCS 4 0 en1
10.0.0.1 5c:57:1a:15:44:91 UHLS 14 5 en1
10.0.0.2 link#6 UHLWI 1 5 en1
10.0.0.4 127.0.0.1 UHS 0 0 lo0
10.0.0.6 b0:e8:92:58:49:46 UHLWI 0 0 en1 1151
10.0.0.10 link#6 UHRLWI 1 10 en1
10.0.0.200/32 127.0.0.1 UGSc 0 0 lo0
10.0.0.255 link#6 UHLWbI 1 41 en1
50.195.77.253/32 10.0.0.1 UGSc 1 0 en1
127 127.0.0.1 UCS 0 0 lo0
127.0.0.1 127.0.0.1 UH 3 1507 lo0
169.254 link#6 UCS 0 0 en1
Internet6:
Destination Gateway Flags Netif Expire
::1 ::1 UH lo0
fe80::1%lo0 link#1 UHL lo0
fe80::72cd:60ff:feff:cf24%en1 70:cd:60:ff:cf:24 UHL lo0
ff01::/32 ::1 Um lo0
ff02::/32 ::1 UmC lo0
ff02::/32 link#6 UmC en1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide