VPN

I have a PIX-525 running version 6.3The PIX is configured for remote access vpn.Mobile users use cisco vpn client software to connect and access the corporate network resources.AAA Server is in place and is used in conjuction with xauth feature to au...

Hi ,i am wondering if 7206VXR + npe400  is good enough for terminating (as BRAS) 2000 pppoe sessions over ethernet.What is max number of pppoe sessions on such hardware ?Is it possible to make traffic shaping for each separate pppoe session ?

Please delete

Hi,i am  using a cisco asa 8.4 version and how do i convert these no -nat statement (prior 8.3)access-list nonat extended permit ip 192.168.10.0 255.255.255.0 172.22.0.0 255.255.0.0access-list prime extended permit ip   192.168.10.0 255.255.255.0 192...

Hi,I am using AnyConnect Client 3.1.04063 connecting to ASA5540 running 9.1 code. Certificates signed by trusted CA (company CA not public CA) are installed on the ASA and the same company root cert exist on the client computer as well - so the user ...

Hi Just want to know the rule of thumb about ICMPIn ASA post 8.3 all ICMP is blocked is that right.......i know that ICMP is blocked from high security level to lower security level....is that right for sake of example my inside is 100 and outside is...

I have an ASA with 9.1(2) and latest AnyConnect and VPN clients. When I connect using either AC or VPN client, management web pages for Cisco UCS C Series servers, and VMware vSphere client will not load. Packet capture shows a RST in response to SYN...

how can i create vpn through my router linksys x3500.our orginization's one office is located in uk to which we want to connect it has local scheme with 10.0.0.0 and our local office has the scheme 192.168.0.0so how can i make vpn. is there any need ...

Hi there,I have configured a vpn-filter which should allow a RDP connection to just one server and block all other traffic. The direction of the traffic is from the local subnet to the remote host.Local subnet     192.168.5.0/24Remote host     192.16...

Hi,I have two ISP's terminating their connections on  to their respective routers.I have one ASA 5520 to have two site-to-site VPNs for the same destination one on each ISP PUBLIC IPs.This setup is ment to have automatic Active - failover VPN tunnel ...

Hello,We purchased a RV042g for simple VPN purposes.  We have been experimenting with QuickVPN and have had a very difficult time.  The clients will occasionally become unable to finalize the connection.  The logs on the router show that authenticati...

Hi,I already use the CISCO VPN client to connect to some VPNs. Now I need to create my own VPN, so the others PCs can use the IP of that computer.In VPN Client I tried New>> As Host I wrote the IP Number of that PC >> I invented a name for the connec...

Hello everybody,We currently want to build a Site-to-Site VPN between a PIX and a Small-Business SA540, but thePhase 2 negotiation fails with "No Phase2 handle found":Mon Aug 26 09:24:37 2013 (GMT +0100): [Cisco] [IKE] INFO:  accept a request to esta...

We are finishing up an AnyConnect user pilot test on an ASA that we use specifically for testing.  I now have an ASA VPN load balancing cluster configured for production use.  However, there are still some pilot users that have the pilot profiles so ...