05-27-2011 06:29 AM
Hi Experts,
Setup:
We have configured IPSEC Site - Site VPN between Cisco ASA 5510 and Sonicwall.
Tunnel is up and running fine we are able to access the Partner Remote Workstation and Vis Versa.
Requirment: We want to deny Remote VPN Users, who are our Partner to access out Workstation.
Example:
Remote IP Range: 192.168.200.x/2r4
Local IP Range: 192.168.10.x/24
Deny traffic comming from 192.168.200.x/24 to 192.168.10.x/24
Thanks in Advance
Kiran Kumar CH
Solved! Go to Solution.
05-27-2011 12:41 PM
Hi Kiran,
You want to deny certain IPs from the remote LAN (of the L2L tunnel), to connect to your workstation?
So, if the remote network is 192.168.200.0/24, you want to deny some of those machines to connect to 192.168.10.x?
If this is so, you can create VPN ACLs (VPN filters) on the ASA to restric the traffic through the tunnel based on IPs.
Please clarify if I misunderstood.
Federico.
05-27-2011 12:41 PM
Hi Kiran,
You want to deny certain IPs from the remote LAN (of the L2L tunnel), to connect to your workstation?
So, if the remote network is 192.168.200.0/24, you want to deny some of those machines to connect to 192.168.10.x?
If this is so, you can create VPN ACLs (VPN filters) on the ASA to restric the traffic through the tunnel based on IPs.
Please clarify if I misunderstood.
Federico.
05-30-2011 03:34 AM
Hi Federico.
I have done the same, it worked thank you I have rated you, you have solved my problem
Thanks and Regards
Kiran Kumar CH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide