cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
762
Views
8
Helpful
19
Replies

dmvpn hub has no nhrp info, spoke is stuck in NHRP

dgawaya1
Level 1
Level 1

Hello, 
My Dmvpn hub doesn't have any nhrp state, yet the spoke is stuch in NHRP 

The hub config is here 

dgawaya1_1-1716257110731.png

The spoke config is here 

dgawaya1_2-1716257416262.png

I will appreciate your help 




 




19 Replies 19

the tunnel is also under a customer vrf 

@dgawaya1 the configuration you provided today does not have the "tunnel vrf <VRFNAME>" configured. Example:

interface tunnel 0
 tunnel vrf <VRFNAME>

You only have "vrf forwarding <VRFNAME>".

dgawaya1
Level 1
Level 1

@Rob Ingram , @MHM Cisco World u guys are amazing. I got it working partly. The hub sides show up but the only one spoke is up. I will troubleshoot further. btw. I only added "tunnel vrf xxxx". I also know my routing might be a bit messy  

////Hub

dgawaya1_0-1716456949484.png

 

///Spoke

dgawaya1_1-1716457030145.png

 



@dgawaya1 thats correct, I did say to configure that a couple of days ago.

You need to define the custom vrf, otherwise the router will use the global routing table to establish the tunnel to the peer. Glad it's working.

So messy' You nedd to clear routing issue.

It not only tunnel vrf

MHM