05-20-2024 07:11 PM
Hello,
My Dmvpn hub doesn't have any nhrp state, yet the spoke is stuch in NHRP
The hub config is here
The spoke config is here
I will appreciate your help
Solved! Go to Solution.
05-22-2024 08:29 PM
the tunnel is also under a customer vrf
05-22-2024 11:11 PM
@dgawaya1 the configuration you provided today does not have the "tunnel vrf <VRFNAME>" configured. Example:
interface tunnel 0
tunnel vrf <VRFNAME>
You only have "vrf forwarding <VRFNAME>".
05-23-2024 02:37 AM
@Rob Ingram , @MHM Cisco World u guys are amazing. I got it working partly. The hub sides show up but the only one spoke is up. I will troubleshoot further. btw. I only added "tunnel vrf xxxx". I also know my routing might be a bit messy
////Hub
///Spoke
05-23-2024 02:40 AM
@dgawaya1 thats correct, I did say to configure that a couple of days ago.
You need to define the custom vrf, otherwise the router will use the global routing table to establish the tunnel to the peer. Glad it's working.
05-23-2024 02:52 AM
So messy' You nedd to clear routing issue.
It not only tunnel vrf
MHM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide