Hi
Am working on a DMVPN Design. Had followed all the guides and practices, but the hub is refusing to map the service-policy to the spoke.
I have:
policy-map OUTPUT
class Z
priority percent #
...
...
...
class X
bandwidth remaining percent #
class class-default
bandwidth remaining percent #
!
policy-map 8M-SHAPER
class class-default
shape average 7600000
service-policy OUTPUT
!
!
int tunnel1
ip address x.x.x.x x.x.x.x
...
nhrp map group 8M-SHAPER service-policy output 8M-SHAPER
...
tunnel mode gre multipoint
tunnel preotection ipsec profile DMVPN shared
...
I've omitted all the irrelevant stuff,
basically the SA's are building, but i am getting the following error when the tunnels build:
%NHRP-3-QOS_POLICY_APPLY_FAILED: Failed to apply QoS policy 8M-SHAPER mapped to NHRP group 8M-SHAPER on interface tunnel1, to tunnel x.x.x.x due to policy installation failure.
!
service-policy with queueing features on SA sessions are not allowed
in conjunction with dmvpn based queueing policy.
!
any idea where the issue lies with this? its doing my head in.
Thanks