11-20-2008 07:33 AM
I have a 6506 platform and I would like to end L2TP sessions on this device, AAA authentication for dialin user and configure av-pair attributes. Has 6500 platform any way to accomplish the request? Is there any special card that can do this work? I read about a MWAN card but I'm not sure can be a solution for my problem.
Thanks
Massimiliano
Solved! Go to Solution.
11-27-2008 10:50 AM
The Cisco Multiprocessor WAN Application Module (MWAM) is a Cisco IOS software application module that you can install into the Cisco 7600 Series Internet Routers. The MWAM allows you to run multiple instances of Cisco Ethernet Service Aggregation applications, such as L2TP Network Server (LNS) and Service Selection Gateway (SSG) application software.
The MWAM requires the following system configuration:
Cisco IOS Release 12.2(14)ZA3 Supervisor image installed on the Cisco Catalyst 6500 Series Supervisor Engine 2.
For further information click this link.
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/relnotes/esa_rn.htm
11-27-2008 10:50 AM
The Cisco Multiprocessor WAN Application Module (MWAM) is a Cisco IOS software application module that you can install into the Cisco 7600 Series Internet Routers. The MWAM allows you to run multiple instances of Cisco Ethernet Service Aggregation applications, such as L2TP Network Server (LNS) and Service Selection Gateway (SSG) application software.
The MWAM requires the following system configuration:
Cisco IOS Release 12.2(14)ZA3 Supervisor image installed on the Cisco Catalyst 6500 Series Supervisor Engine 2.
For further information click this link.
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/relnotes/esa_rn.htm
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide