09-24-2013 03:35 AM
Hi there!
I want to setup on Cisco ASA 5510 with two different ISPs, and i've two public IP addresses.
let supose the IP are:
ISP01 -> IP address 1.1.1.1
ISP02 -> IP address 2.2.2.2
As default ip route, it is the gateway from ISP01 1.1.1.4, and as backup the gateway from ISP02 2.2.2.4.bli
I'm using the Firewall for VPN services, so the clients connects to its public IP.
Now my question is:
Could VPN works on both public IPs on the same time?
Regards!
09-24-2013 03:41 AM
Hi Lessandro,
take a look at this topic: https://supportforums.cisco.com/thread/2240710?tstart=60
regards,
Thomas
09-24-2013 08:53 AM
Hi,
If you are using the VPN client (IPsec) then answer is no it doesn't work with the both the ISP at the same time. The reason behind this is when the a VPN client connect it adds a dynamic route for the VPN pool IP pointing it towards your default gateway. So whichever ISP you are using as a default gateway you can connect the VPN client only on that interface.
Is you are using Anyconnect VPN client then no problem you can connect to any interface if any connect is enable on that interface.
If you are using site to site then please refer the link Thomas gave you.
I hope this Answers your query.
Thanks
Jeet Kumar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide