Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Lasandro Lopez
08-18-2017
Lasandro Lopez
Member since
02-08-2013
Beginner
Created by
Lasandro Lopez
in Policy and Access
in Policy and Access
12-12-2016
04:27 AM
12-12-2016
04:27 AM
Dears. I've configured a tacacs server on vrf MGMT, and it is working fine. Also, i want to configure another tacacs server in another vrf OOB, in order to connect to IOS XR devices in case that link in vrf MGMT is down in ports MgmtEth0/RSP0/CPU0/0 for example
interface MgmtEth0/RSP0/CPU0/0 description Out-of-band-management vrf OOB ipv4 address 172.16.1.1 255.255.255.0
The problem is that i've configure the source for tacacs-server to be in vrf MGMT
tacacs source-interface Loopback333 vrf MGMT
interface Loopback10 vrf MGMT ipv4 address 172.30.0.1 255.255.255.255
So, what can i do in such scenario?
Regards!
... View more
Labels:
Created by
Lasandro Lopez
in XR OS and Platforms
in XR OS and Platforms
03-09-2015
07:18 AM
03-09-2015
07:18 AM
Hi there! I've applied policy-maps on control-plane, based on cisco recomandation. Now i need to know, what snmp OID i've to use to monitor them (i'm using zabbix) Let me know. Regards!
... View more
- Tags:
- snmp oid mib
Labels:
01-21-2015
11:43 PM
HI Alexander. It was not problem in control-plane. it needed something like: snmp-server vrf TEST. Regards!
... View more
Created by
Lasandro Lopez
in XR OS and Platforms
in XR OS and Platforms
01-21-2015
07:14 AM
01-21-2015
07:14 AM
Hi there! How to configure snmp v2, with community string, for ASR 9000 series, in interface loopback 1, that has vrf TEST Regards!
... View more
Labels:
Created by
Lasandro Lopez
in Voice over IP
in Voice over IP
10-27-2014
03:12 AM
10-27-2014
03:12 AM
Hi there! i've two routers. Router R1-> COnnects to internet, and has TWO VRFs VRF -> SERVERS VRF -> INTERNET (goes to internet) Router R2-> has same VRFs as Router R1 Now...on Router R2, i've a server that connects to interface running in VRF SERVERS, and i want it that for default route, to go to vrf INTERNET. How to do that? via policy-based-routing? via import/export maps? Let me know. Regards!
... View more
Labels:
Created by
Lasandro Lopez
in VPN and AnyConnect
in VPN and AnyConnect
06-20-2014
01:21 AM
06-20-2014
01:21 AM
Hi there! I want to know, for how many times in seconds, the crypto session become active between to cisco routers in site-to-site vpn. For example: Site01: Public IP: 1.1.1.1 LANSite02: 192.168.1.1 Site02: Public IP: 1.1.1.2 LANSite02: 192.168.2.1 there are created site-to-site vpn between these two routers, with preshared key, and now i need to know the time that from a pc in site01, is send ping request for a PC in site02. how many seconds will the connection happen, aftter sending first icmp packets? 3seconds? 5seconds? 10second? is there a official book/document that list this? Regards!
... View more
Labels:
Created by
Lasandro Lopez
in IP Telephony and Phones
in IP Telephony and Phones
05-07-2014
03:49 AM
05-07-2014
03:49 AM
i was trying to change the ip phone from sccp to sip, and when i tried was this one in this link: http://www.mehrdust.com/archives/cisco-ip-phones-79xx-with-asterisk and i used the files on download here: http://www.mehrdust.com/downloads/7911-SIP-P0S3-08-9-00.zip (on the same link is this suggesition) but now i'm totally in trouble. After one factory reset i did by pressing # during boot, and then 123456789*0#, the ip phone did not upgrade to firmware i tried, and now nothing is shown in its display. THe phone pickup ip address (192.168.2.210), i could ping it from the computer that has tftp server and serves as dhcp server also, but nothing i could do with that. i could not access the phone from webpage, and when i try to reset it again with : option a. pressing # during boot, and then 123456789*0#, option b. # key till the extension lights blink amber…then press 3491672850*# ( i found on this link: http://www.adrianandgenese.com/blogger/2011/02/16/how-to-upgrade-or-convert-a-cisco-ip-79xx-7940-7960-794x-796x-797x-phone-to-sip-or-sccp/) it is the same situation. where i was wrong, what can i do now? please help me. see in attach the photos Regards
... View more
- Tags:
- 7911
Labels:
Created by
Lasandro Lopez
in IP Telephony and Phones
in IP Telephony and Phones
05-07-2014
03:45 AM
05-07-2014
03:45 AM
Hi Guys! i've tried to follow the links you provide, but i did not find an exact guide for that model 7911, there were many suggestions, but none of them solved my case... the last test i tried was this one in this link: http://www.mehrdust.com/archives/cisco-ip-phones-79xx-with-asterisk and i used the files on download here: http://www.mehrdust.com/downloads/7911-SIP-P0S3-08-9-00.zip (on the same link is this suggesition) but now i'm totally in trouble. After one factory reset i did by pressing # during boot, and then 123456789*0#, the ip phone did not upgrade to firmware i tried, and now nothing is shown in its display. THe phone pickup ip address (192.168.2.210), i could ping it from the computer that has tftp server and serves as dhcp server also, but nothing i could do with that. i could not access the phone from webpage, and when i try to reset it again with : option a. pressing # during boot, and then 123456789*0#, option b. # key till the extension lights blink amber…then press 3491672850*# ( i found on this link: http://www.adrianandgenese.com/blogger/2011/02/16/how-to-upgrade-or-convert-a-cisco-ip-79xx-7940-7960-794x-796x-797x-phone-to-sip-or-sccp/) it is the same situation. where i was wrong, what can i do now? please help me. see in attach the photos Regards
... View more
Created by
Lasandro Lopez
in IP Telephony and Phones
in IP Telephony and Phones
05-03-2014
03:53 AM
05-03-2014
03:53 AM
Hi there! Can i make a cisco 7911 sip enable, and integrate it with 3rd party pbx software? let me know. Regards!
... View more
Labels:
Created by
Lasandro Lopez
in IP Telephony and Phones
in IP Telephony and Phones
05-03-2014
03:53 AM
05-03-2014
03:53 AM
Hi there! Can i make a cisco 7911 sip enable, and integrate it with 3rd party pbx software? let me know. Regards!
... View more
Labels:
04-10-2014
02:33 AM
i want to use my cisco asa for Remote Access (i've created vpn profiles, and users). So, asa behind a TPLink router with DMZ...will it work or not, that is my question.
... View more
04-10-2014
01:35 AM
Hi Seb! Yes...my router TPLInk has a DMZ option...and i put the IP of asa to it but will VPN work or not on Cisco ASA 5505??? Regards!
... View more
04-10-2014
01:06 AM
Hi there! i've an account in dyndns, and i want it to be setup to my cisco asa 5505. I don't see any place on firewall where to put username/password of my account of dyndns. if this don't work...can i setup the scenario as below: connect the wan interface that comes from ISP to another router that support DynDNS (for example TPLink...), and then forward all the request on WAN port to my cisco ASA 5505 on it's WAN interface. So, can i offer in same time VPN Services to my cisco asa 5505, even it is behind another router that forward everything to asa's IP of wan interface?
... View more
- Tags:
- vpn dyndns firewall
Labels:
Created by
Lasandro Lopez
in Policy and Access
12-12-2016 04:27 AM
12-12-2016 04:27 AM
Dears.I've configured a tacacs server on vrf MGMT, and it is working
fine.Also, i want to configure ...
Created by
Lasandro Lopez
in XR OS and Platforms
03-09-2015 07:18 AM
03-09-2015 07:18 AM
Hi there!I've applied policy-maps on control-plane, based on cisco
recomandation.Now i need to know,...
01-21-2015 11:43 PM
HI Alexander.It was not problem in control-plane.it needed something
like: snmp-server vrf TEST.Rega...
Created by
Lasandro Lopez
in XR OS and Platforms
01-21-2015 07:14 AM
01-21-2015 07:14 AM
Hi there!How to configure snmp v2, with community string, for ASR 9000
series, in interface loopback...
Created by
Lasandro Lopez
in Voice over IP
10-27-2014 03:12 AM
10-27-2014 03:12 AM
Hi there!i've two routers.Router R1-> COnnects to internet, and has TWO
VRFsVRF -> SERVERSVRF -> INT...
Created by
Lasandro Lopez
in VPN and AnyConnect
06-20-2014 01:21 AM
06-20-2014 01:21 AM
Hi there!I want to know, for how many times in seconds, the crypto
session become active between to ...
Created by
Lasandro Lopez
in IP Telephony and Phones
05-07-2014 03:49 AM
05-07-2014 03:49 AM
i was trying to change the ip phone from sccp to sip, and when i tried
was this one in this
link:htt...
Created by
Lasandro Lopez
in IP Telephony and Phones
05-07-2014 03:45 AM
05-07-2014 03:45 AM
Hi Guys!i've tried to follow the links you provide, but i did not find
an exact guide for that model...
Created by
Lasandro Lopez
in IP Telephony and Phones
05-03-2014 03:53 AM
05-03-2014 03:53 AM
Hi there!Can i make a cisco 7911 sip enable, and integrate it with 3rd
party pbx software?let me kno...
Created by
Lasandro Lopez
in IP Telephony and Phones
05-03-2014 03:53 AM
05-03-2014 03:53 AM
Hi there!Can i make a cisco 7911 sip enable, and integrate it with 3rd
party pbx software?let me kno...
04-10-2014 02:33 AM
i want to use my cisco asa for Remote Access (i've created vpn profiles,
and users).So, asa behind a...
04-10-2014 01:35 AM
Hi Seb!Yes...my router TPLInk has a DMZ option...and i put the IP of asa
to itbut will VPN work or n...
Public Statistics
| Date Registered | 02-08-2013 06:23 AM |
| Date Last Visited | 08-18-2017 04:03 AM |
| Total Messages Posted | 106 |
| Total Helpful Votes Received | 5 |
