06-01-2003 11:27 PM - edited 02-21-2020 12:34 PM
Hi all
I've setup a test with dynamic filters on acs 3.1 with radius attributes and a test with pix acls. both test didn't work with my vpn concentrator sw ver. 4.01. I checked the "Monitoring | Dynamic Filters Screen" for the dynamic filter, but it didn't show up either. I did the setup all as explained on the cco.
Do you have any experiences with dynmaic filters on vpn concentrator?
regards, andre
06-06-2003 06:49 AM
Hi, you need to configure the Dynamic Filters on your ACS server only while the configuration on the VPN Concentrator will remain static. You do not need to change the configuration on the concentrator.
06-09-2003 10:10 PM
Hi, changing the nas properties "Authenticate Using" in ACS to "RADIUS (Cisco IOS/PIX) helped. Now it is working.
Andre
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide