Easy VPN Client (5505) Peer Timeout

[jmeggers]

Is there a way to reduce the peer timeout setting on the client so it will fail over to a second Easy VPN server more quickly? Right now it seems to be taking about 60 seconds and I'd like to reduce that if possible. There used to be a checkbox in the VPN client to change that value but I can't find a corresponding hardware client configuration setting for that. 

[Poonam Garg]

You have to change xauth timeout on Easyvpn Server, which is by default 60 sec.

For changing the user authentication (xauth) timeout on the ezvpn server:

"crypto isakmp xauth timeout"

HTH

"Please rate helpful posts"

[mahesh18]

Hi Poonam,

On ASA 9.1 i have no option for xauth.

ASA1(config)# crypto isakmp ?

configure mode commands/options:
  disconnect-notify  Enable disconnect notification to peers
  identity           Set identity type (address, hostname or key-id)
  nat-traversal      Enable and configure nat-traversal
  reload-wait        Wait for voluntary termination of existing connections
                     before reboot

Regards

MAhesh