01-08-2016 03:43 AM
Hi guys,
I have an ASA 5505 setup as Easy VPN Client. Current setup uses two interfaces: inside and outside. I have tested connection to the server and works fine.
Because of specific site reasons I am restricted to one interface only, you can call it inside, lan, whatever. So I need to connect remote site's clients behind this interface and also use it to reach Easy VPN Server. Is this possible in the first place?
Obviously I will place the default route through inside interface and another router will be provide Internet connection.
Solved! Go to Solution.
01-08-2016 10:20 PM
It is so difficult to get working you should consider the answer is no.
Specifically, you must have an inside and outside interface or EasyVPN will not come up.
01-08-2016 10:20 PM
It is so difficult to get working you should consider the answer is no.
Specifically, you must have an inside and outside interface or EasyVPN will not come up.
02-06-2016 05:04 AM
I raised a TAC ticket and one miss or lady informed me I need at least two interfaces.
Pretty dissappointing if you ask me.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: