01-24-2008 01:44 AM - edited 02-21-2020 03:30 PM
hi I have 4 Easy VPN sites which are terminating on ASA fire wall and we need access from all VPN sites to each other currently all are Easy VPN sites is it possible in Easy VPN ?/
01-25-2008 10:17 PM
Yes, this should be possible using
The feature you are trying to enable, permit traffic to enter and exit the same interface, to permit two or more spokes (VPN clients or hardware clients) comunicate to each other, is only for 7.x version.
Please refer the below URL for details:
Regards,
Arul
** Please rate all helpful posts **
01-28-2008 01:41 AM
command:
same-security-traffic permit intra-interface
01-28-2008 09:00 PM
Dear Sir,
Thank you ... also provide us an example with Router, we want to integrate site using Router acting as EzVPN in mesh setup pl find below is the show version
Cisco IOS Software
, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(9)T5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 16-Aug-07 14:30 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
MOALAJAHAUH uptime is 1 hour, 5 minutes
System returned to ROM by power-on
System image file is "flash:c1841-advipservicesk9-mz.124-9.T5.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 1841 (revision 7.0) with 235520K/26624K bytes of memory.
Processor board ID FCZ112310L9
2 FastEthernet interfaces
1 ATM interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide