Hi,
Recently i was configured my C7206 (IOS 12.4.10a) to remote router C2801 (IOS 12.4.9.T1) with ipsec configured via leased line. All the application are working fine if i configured the encryption using DES. However, when i configured the encrytion using 3DES, all the application still work fine except one of the printing job using DLink print server across this ipsec. Configuration as follows:
!
!
crypto isakmp policy 30
encryption 3des
hash md5
authentication pre-share
group 2
crypto isakmp key xxxxx address 192.100.1.2
!
!
crypto ipsec transform-set Tunnel-Transform-IPSec ah-sha-hmac esp-aes 256 esp-sha-hmac
mode transport
!
crypto map IPSEC-R1-R2 101 ipsec-isakmp
set peer 192.100.1.2
set transform-set Tunnel-Transform-IPSec
match address 101
!
!
interface Serial0/1
ip address 192.100.1.1
mtu 1600
bandwidth 1984
encapsulation ppp
crypto map IPSEC-R1-R2
crypto ipsec df-bit clear
!
!
Any one can help?
Regards,
Jeff.