i have on question: It is possible to configure ASA 5520 with dual ISP for load balancing or load sharing?I don't mean for redundancy or backup!thanksMP
i have on question: It is possible to configure ASA 5520 with dual ISP for load balancing or load sharing?I don't mean for redundancy or backup!thanksMP
I have sucessfully stablished the VPN tunnel between the two sites. Also I am able to do a ping test to both Routers Inside Interface with 100% success, but when I try to ping another device I got packets lost 50%.I am Using a 871 and a 1841 Both on ...
dear all,i want to know, can i have both site to site and easy-vpn server on cisco 1811.if yes, then whats the command for both. inter fa0 )# crypto map site2site1what is the command for next vpn map on interface fa0.
Hallo All!1) I have 3745 and i'm configuring webVPN. Everything works fine, but i have a new task. I have 2 different policy groups on the 3745 fo SSL VPN (webVPN) - policy_1 and policy_2. 3745 checks users credentials on the RADIUS server (Microsoft...
Hi.I have the following problem in my company. We have users that are going through a proxy server located on the DMZ side of a PIX to the internet(allowed through the DMZ ACL to the outside etc.).That works great. The problem arises when they use a ...
My setup is like this:VPN client-->Concentrator 3030 --> PIX--> Microsoft IAS (Radius)-->Microsoft ActiveDirectory.I use group authentication enabled for the client to authenticate with the concentrator and then for the user authentication MS Active ...
We are setting up Site to Site VPNs over a 3g wireless network. We need for this site to sit only to connect when something is initiated from either side. Can i just set a timeout on each end? Is site to site over a 3g network possible?
I got this error:Router1(config)#crypto ca authenticate SCIS-E36A410855% Error in receiving Certificate Authority certificate: status = FAIL, cert length = 0Any ideas?ThanksHere?s the config:Router1#show runhostname Router-Main!clock timezone GMT 8!i...
I've set up a site-to-site VPN between a 501 and a 506, each with its own private subnet, and everything works fine... except that machines on the 506's subnet can't contact machines on the 501's subnet.Since the VPN tunnel works, I suspect a problem...
Hi. I would like to setup a remote router where clients can dial in using their 56k modem. I've read that for this scenario, one would require network module digital modems and network module ISDN BRI. Cisco has announced EoL/EoS for NM digital modem...
1) Is there any support provided for uploading our own custom login pages to the ASA appliance? e.g. flash embeded html page2) Can the ASA appliance be configured to redirect the authentication to a specific URL (custom web server which will do some ...
This is really weird, same username and same password when connecting to the concentrator via console cable, yet... When connecting to it via http/https and using the SAME username and password, its coming up saying that its a badlogin. =**[ Very ...
What version is required to uses reverse SSH, I have 12.4 running, not able to find the commands, to enable reverse SSH.
Can anyone help me with VPN load balancing? Is it possible with PIX firewall and if yes then how to do?Is this possible if i am having two different ISP for internet links? Also provide me the links of document if any.
Hi there,does anybody know how many VPN tunnels the Router C2600 with IOS 12.4 can establish. Or how many VPN tunnels can I configure on this Router?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-13-2024 10:09 PM | ||
08-13-2024 01:46 AM | ||
08-12-2024 10:32 PM | ||
08-08-2024 05:51 PM | ||
07-19-2024 05:14 AM |
User | Count |
---|---|
8 | |
6 | |
3 | |
1 | |
1 |