03-01-2011 12:21 PM
I have a client trying to install the Cisco VPN Client (version 5 - for Windows 7) on a laptop that has an Intel i3 processor. The client has been installed on other Win7 systems with no problem but when he installs on this system he gets the following error:
This installation package is not supported by this processor type. Contact your product vendor.
Any ideas as to why the install isn't working? Thanks.
03-09-2011 08:15 AM
Is windowversion 64 bit? If so,you'll need anyconnect.
03-09-2011 08:24 AM
Thanks for the response, I was beginning to wonder if anyone would reply! I should have mentioned in my original post that the VPN is
configured on a PIX 506e, not exactly the newest piece of equipment out there. Will the AnyConnect client work with that older PIX?
03-09-2011 08:33 AM
No the PIX doesn't support the Any Connect client . Check this link out.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_qanda_item09186a00805b87d8.shtml
04-25-2012 06:18 PM
DialerString wrote:
Is windowversion 64 bit? If so,you'll need anyconnect.
Incorrect. VPN Clist is supported and works fine on Windows 7 64bits.
04-25-2012 10:28 AM
Hi, could you solve this problem ?? i'm facing exacly the same one, can yo share ??
Rgds
Vicente
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide