07-18-2019 02:44 AM
Hi all,
I've setup my first FlexVPN on a Cisco ISR 4431 without success and i keep getting an authentication or timeout error and i think that i've put in authentication remote eap query-identity without a server so firstly is this command meant to ONLY work as a sort of pass-through to a RADIUS server and if so what commands do i need to run to put it as a local authentication (i.e so the username and password are on the Cisco itself for the remote users to dial onto)
Thanks
Solved! Go to Solution.
07-18-2019 03:44 AM
You would use "eap query-identity" as the remote authentication if using a RADIUS server. If authenticating locally you would use "anyconnect-eap aggregate"
Guide here
07-18-2019 03:44 AM
You would use "eap query-identity" as the remote authentication if using a RADIUS server. If authenticating locally you would use "anyconnect-eap aggregate"
Guide here
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide