cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
348
Views
0
Helpful
1
Replies

Getting Started.... PIX, VPN, IPSec

stownsend
Level 2
Level 2

I have a PIX515R with a 1FE card. Its software is all up to date.

a Few 1721s and a 2620.

I'm lookiing for some books, Websites, etc to help me set up a Multi-Office VPN Network.

The Offices will be connected via Frame Relay. So the Routers will be behind the PIX. I can configure the IOS on them.

Though we have a Few Offices that will be connected to us via DSL, Cable, and Dialup.

Any Suggestions on where I should get started would be appreciated!

Thanks!

Scott<-

1 Reply 1

yusuff
Cisco Employee
Cisco Employee

Check the following Tech Tips page which has heaps of sample configs for IPSec

http://www.cisco.com/warp/customer/707/index.shtml#ipsec

HTH

R/Yusuf