Getting Started.... PIX, VPN, IPSec

[stownsend]

I have a PIX setup to allow the locally connected network to get out through the PIX, for some reason my other internel routed subnets cant get out. )-;

Any books, sites, tips, etc to help me get up to speed on the PIX?

Thanks,

Scott<-

[yusuff]

for your internal routed subnets to talk through PIX, check the following;

- have nat/global configured correctly

- if there is an ACL on inside interface, permit these networks

- static route on PIX for inside networks pointing to internal next-hop

Best place to start with following URLs

http://www.cisco.com/warp/customer/110/top_issues/pix/pix_index.shtml

http://www.cisco.com/warp/customer/707/index.shtml#pix

Also get this book, a good resource for starters;

Cisco® Secure PIX® Firewalls

ISBN: 1587050358

http://www.ciscopress.com/catalog/product.asp?product_id={DD5D9082-5332-44DA-9AC7-E7D9D91035C6}

HTH

R/Yusuf

[stownsend]

Thanks I'll Check out the links and the books!

Scott<-