04-30-2020 04:06 AM
Dear All!
I need some help regarding VPN. I want to create a VPN on Cisco router with the remote location. Do I need to install any module for it?
Need Suggestion. Thanks
04-30-2020 04:09 AM
Hi,
You will need to ensure you have a license to run IPSec, you shouldn't need a module
What model cisco router do you have?
The following guide will help you configure a static VTI to another router.
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/115782-flexvpn-site-to-site-00.html
HTH
05-03-2020 09:53 AM
05-03-2020 10:07 AM
That's old hardware which is EOL, but the image you are runnning does allow you to run all features including IPSec VPN, see reference:-
https://www.cisco.com/web/partners/downloads/765/tools/quickreference/ciscoiospackaging-eng.pdf
07-20-2020 12:30 PM
Thanks for replying.
Cisco 2911
Another Question:
I want to pbx786-v0ip.therealTestpbx.com traffic to specific next hop. How can I do that?
07-20-2020 12:43 PM
So is your initial question now answered correctly?
You would need a static route, set to the specific next hop.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide